Getting to the Serpentine launch site

Our Serpentine launch site is approximately 43 km from Bendigo, along the Loddon Valley Highway.

The entrance to the farm has changed If you have been to Serpentine before, do not rely on your previous route — please use the gate coordinates below.
Entry gate · GPS
-36.484339, 144.003488
Tap a button below, or copy the coordinates into your own navigation app.

Driving directions from Melbourne

  1. Drive to Bendigo, then head out through Eaglehawk along the Loddon Valley Highway (B260).
  2. After roughly 30–35 minutes (if you’re keeping within the speed limit :- ) start looking for the bridge over “Bullock Creek”.
  3. About 4 km past the bridge, the road turns slightly to the right.
  4. A further 1.5 km on, the access gate to the farm is on your right.
  5. You will know you are close when you see Old Bridgewater-Serpentine Rd on your left — it is the only road between the bend and the farm gate.
Please approach the site slowly. None of us wants to be covered in dust, and there may be cables across the road.
Gone too far? If you continue down the highway and reach Serpentine, you have overshot the gate — turn around.

Approach map

Map showing the Loddon Valley Highway approach to the Serpentine launch site farm gate
The farm gate in relation to the Loddon Valley Highway.

Satellite view of the gate

Shared pin: maps.app.goo.gl/LSPJjnrSGJzrpHwG7